Bars:

 

Recommendation to change the value of #2.403 Back uprise with ½ turn in handstand from D to C #2.303. Effective August 1, 2006.

Motion: D. Witenstein

Second: M. Dykes

PASSED (11 in favor, 7 opposed)

 

Recommendation to change the value of #3.507 Weiler kip to handstand with 1/1 turn after handstand (Healey) from E to D (#3.407) to remain consistent with the policy that the Healey turn does not raise the value of the core element. Effective August 1, 2006.

Motion: D. Witenstein

Second:  C. Bunge

PASSED

 

Recommendation to lower the value of #5.408-Jaeger from LB to HB (D) to “C” – new #5.305. Effective August 1, 2006.

Motion: C. Bunge

Second: C. Christensen

PASSED

 

Recommendation to raise the value of a #4.204 (long swing forward with ½ turn and flight over LB to hang on LB) to a “C” whenever it is performed immediately following a D or E release element. Effective August 1, 2006.

Motion: L. Reid

Second: C. Jarrett

PASSED

 

Beam:

Recommendation to renumber #2.202 split jump to #2.201 so that all split jumps and split leaps are in same line in the JO Code of Points.  Effective August 1, 2006.

Motion: L. Mulvihill

Second: L. Reid

PASSED

 

Recommendation to raise the value of Beam element #7.303 - Side aerial (C) to D – new #7.403. Effective August 1, 2006.

Note:  Because this element is now a D, it will no longer be allowed for Level 8.

Motion: P. Panichas

Second: M. Elfenbein

PASSED

 

Recommendation to add the following Beam elements:

#3.203 1/1 (360°) turn with heel of free leg forward, at 45° throughout the turn, forward leg extended. = B

#3.202 1/1 (360°) turn on one leg, thigh of free leg backward upward at 45° throughout the turn = B

Effective August 1, 2006.

Motion: A. Schweyer

Second: L. Reid

PASSED

 

Floor Exercise:

Recommendation to change value of Floor Exercise element #6.101 - Salto forward tucked with ½ twist (A) to B - new #6.201. Effective August 1, 2006.

Motion: C. Jarrett

Second: D. Houlton

PASSED

 

XXII.  GENERAL EXECUTION

 

Myra Elfenbein presented visual examples of degrees of arm and leg bend and requested that the committee clarify the application of the up to 0.30 deduction for bent arms/legs.

Guidelines for recognizing the degree of arm or leg bend:  

·         90° or more bend receives the maximum deduction of 0.30.